Bräuniger IQ Motor

View Full-Size Image

The first electronic flight instrument worldwide, which was especially developed for flying motor driven paragliders, paraglider-trikes and hangglider-minimum systems

In addition to the usual indicators for vario and altitude, it provides indicator for CHT (cylinder head temperature) and RPM (motor rotation)
More over, it contains the innovative AGM ( Altitude Guidance Mode = optical altitude guiding function ).
Due to this feature a pre-set flying altitude may be maintained within a certain range of tolerance !
Motor data are programmable with individually adjustable alarm thresholds. In case of transgression of a pre-set value, the IQ-MOTOR triggers an optical alarm, e.g. the corresponding indicator starts flashing.

Standard Functions

• 3 Altimeters
• Pressure adjustment - QNH manual
• Vario with 5 readings/s
• easy instrument settings by menu
• Digital vario filter adjustable
• acoustic by user adjustable
• Vario averager
• analog Vario with different display types
• Audio for vario
• adjustable stallalarm ( only with pitot tube or vane sensor )
• Battery level monitoring, temperature compensated
• Flight timer
• Intelligent Launch detection
• Intelligent Landing detection
• automatic flight analysis after landing
• 100 flights recorded (peak data)
• Flight memory hours at 60 or 20 sec. scan rate 291/97
• max. Trackpoints 24000
• metric or imperial units
• scratch resistant plastic film (option )
• Display protection by 1,5 mm perplex scale
• aerodynamic housing
• robust ABS housing
• 2 intuitive softkeys at the keypad

Advanced Functions

• Simulation mode
• Vario Tone Acoustic highly adjustable
• 28 userfields available
• 6 pages of userfields
• 3 userfields / pages
• user customizable display
• map display with zooming and panning
• high resolution graphics 240x160
• adjustable polars
• standard McCready functions
• USB1.1 data in/out to PC
• number of independant battery banks and total operation hours 2/ca.50
• automatic switchover between battery banks
• rotating speed sensor connection
• speed sensor calibration ( pitot or vane sensor )
• Stall alarm dependant on altitude (with vane-or pitotsensor)

GPS-Functions

• 20 channel GPS receiver * neu
• 3D flight logger IGC format
• 4 L/D displays
• 200 waypoints
• 20 routes
• 30 waypoints/route
• compass rose for intuitive navigation
• wind direction with windspeed
• advanced GOTO functions
• thermal function: giudance ( direction and distance) to last thermal
• glide calculator to goal over several waypoints
• 5 different Waypoint formats
• Restricted Areas Functions
• 20 restricted areas
• optinal restricted area-memory up to 150
• display of restricted areas in map
• upload of restricted areas with PC from standard programs
• user defined restricted ares (special areas)
• adjustable warning distance to a restriced area

Competition Functions

• special Competition Route
• FAI cylinder input, different for every waypoint
• start cylinder input, with ENTER or EXIT function
• 10 different start gates
• countdown timer
• automatic or manual switchover between waypoints
• during competition route alternate waypoint selectable

SMS Functions to a mobile phone ( limited Bluetooth - Option)

• pairable with most mobiles phones
• cyclic position SMS sending
• competition mode: 8 pos/SMS
• plain mode: 1 pos/SMS
• keyactivated SMS
• emergency SMS after crash landing

Highlights

• Elegant and functional design
• High-resolution graphic display
• Easy entry of Competition co-ordinates/ Routes via PC with USB cable.
• FAI-conform flight data are saved until landing.
• Photographic documentation is no longer necessary (in accordance to FAI/IGC regulations for gliders)
• The recording ratio is adjustable according to flight mission between 1 and 60 sec., upon arrival at Waypoint sector the ratio is automatically switched to 1 sec. and an acoustical as well as optical signal is provided to the pilot. It is possible to record up to 290 hours flight time.
• For each flight are recorded: GPS-position, altitude (air pressure and GPS-value), TAS, speed over ground, time, marking for positions.
• Easy data transfer via USB interface to the PC. IGC- and NMEA-data are available. IGC data are provided with digital signature, so that manipulations are identifiable.